Adaptive GLR-, Rao- and Wald-based CFAR detectors for a subspace signal embedded in structured Gaussian interference

The problem of detecting a subspace signal embedded in subspace Gaussian interference and thermal noise is studied in this paper. In this problem, both the signal-independent and signal-dependent interferences are assumed to be present, therefore the overall interference subspace covers the signal subspace. The approach of this paper extends previous works involving either of those two kinds of interferences. A set of secondary data containing only interference plus noise is employed to estimate the interference covariance matrix and the noise power. Three new detectors are designed via the generalized likelihood ratio (GLR), Rao and Wald tests, respectively. Their probabilities of false alarms (PFAs) and detections are analytically derived. The PFAs show that the new detectors have the constant false alarm rate (CFAR) property against the interference and noise. Numerical results show that the new detectors outperform their counterparts for the studied problem. Furthermore, the new detectors are less sensitive to the secondary data size and to the mismatched subspace signal than some other detectors, such as the GLR detector (GLRD), the adaptive matched filter (AMF), the adaptive subspace detector (ASD), etc.     

高功率光纤激光器光纤器件封装应力影响研究

高功率激光器无源器件制作过程中封装不当引入的应力,会导致信号光光束质量劣化和光纤温升,为了解决此问题,理论分析了光纤形变对信号光模式分布的影响,利用有限元方法建立包层光导致光纤发热模型,实验研究了不同封装方式对光纤发热情况和信号光光束质量的影响。实验表明,应力导致的光纤形变会造成信号光M2值在受力方向上略微变小而其垂直方向上变大,在输出100 W信号光时,施加应力导致的M2值的变化最高为0.39,与仿真结果相符。在光纤温升方面,相比于使用硬质胶水带来的12 ℃温升,使用硅橡胶封装的剥离器将温升控制在5 ℃以内,且其封装应力引入的M2值的变化在0.05以内。     

面向文本数据的正则化交叉验证方法

面向文本数据建模时,交叉验证方法是特征选择及模型比较任务中的常用方法。许多研究表明,文本数据模型的性能估计对交叉验证的数据切分方式较为敏感,不合理的切分方式可能会导致不稳定的性能估计值,使得实验结果可复现性差。该文试图论证基于多次重复(m次)的2折交叉验证,通过引入对训练集、验证集分布差异的约束,所构造的正则化m×2交叉验证方法(简记为m×2 BCV)可以改善模型的性能指标的估计,适宜于模型比较。该文首先针对文本数据引入训练集与验证集分布差异的卡方度量,基于该度量构建数据切分的正则化条件,以最大化模型性能指标的信噪比为目标,给出了满足正则化条件的m×2 BCV的数据切分优化算法。最后,以自然语言处理中汉语框架语义角色标注任务为例,验证了基于m×2 BCV方法的有效性。     

柠条的纤维特性及其双螺杆CMP制浆性能研究

以柠条为原料，分析了其化学组分和纤维形态，并探讨了柠条双螺杆CMP法的制浆工艺以及浆料的纤维形态和成纸的物理性能。研究结果表明：与针、阔叶木相比，柠条原料中纤维素和综纤维素质量分数较低，苯醇抽出物和热水抽出物质量分数较高，柠条纤维长度总体偏短，木质部和皮部的纤维质量平均长度分别为0.621和0.819 mm，还存在部分杂细胞。采用3.5% Na₂SO₃和1.5% NaOH常温预浸12 h、90℃汽蒸1 h后再用双螺杆挤浆机在质量分数35%下进行搓丝，并结合高浓盘磨机磨浆，所得CMP浆得率可达73%。柠条CMP浆基本保持了纤维原有的长度，质量平均长度达0.650 mm，长宽比为32.7，纤维解离较好，但分丝帚化情况不理想，含有部分纤维束和杂细胞。当加拿大游离度为300 mL时，柠条CMP浆成纸的环压强度指数和松厚度较高，分别为8.67（N·m）/g和2.56 cm³/g，抗张指数为19.6（N·m）/g，本色浆白度较高，达50%（ISO）。柠条CMP浆适合配抄瓦楞原纸等包装用纸，漂白后可配抄新闻纸和白板纸。     

生物质纤维和改性木质素对聚乳酸结晶性能的影响

采用改性木质素(MZS)作为成核剂,生物质纤维(BF)作为增强剂,通过双螺杆挤出机制备了生物降解的聚乳酸(PLA)/BF/MZS材料。采用差式扫量热仪(DSC)、电子万能试验机和扫描电子显微镜(SEM)分析了BF和MZS对PLA材料性能的影响。结果表明,BF和MZS有效提高了PLA的结晶能力和力学性能。当BF和MZS的含量分别为15%和1%时,PLA材料结晶度提高至67.1%,在50℃/min降温速率下仍具有较高的结晶能力。105℃等温结晶时,15%BF和1%MZS的PLA材料半结晶时间降低至9.0 s,比纯PLA缩短了72.2%。当PLA含有3%BF和1%MZS时,拉伸强度和冲击强度分别为70.1 MPa和7.4 kJ/m^2,比纯PLA分别提高了7.8%和10.4%,根据SEM显示,当BF含量为3%时,在PLA材料中分布较均匀。     

少量有机碳对单级自养脱氮工艺性能的影响

采用序批式生物膜反应器(SBBR),经过4个阶段的培养,快速富集好氧氨氧化细菌(AOB)和厌氧氨氧化细菌(AnAOB),并考察不同低碳氮比对工艺脱氮性能的影响。结果表明,NH4^+-N去除率可达到99%以上,TN去除率可达到90%以上。对应C/N=0、1和2时,反应器出水NH4^+-N和TN去除率分别为99.59%、99.5%、98.47%和93.75%、97.22%、98.11%。说明少量COD的存在,可实现同步硝化-厌氧氨氧化-反硝化,且在一定程度上提高脱氮效率。     

超生雾化降尘研究及应用

为解决某矿破碎筛分车间粉尘污染问题，采用喷嘴雾化理论设计喷嘴雾化降尘实验，并根据实验结果在该矿破碎筛分车间应用了超声雾化降尘技术。实验及应用结果表明：超声雾化发生器的液体雾化装置，气体辅助雾化装置和雾束形成器的几何结构影响喷雾的雾化参数与流量特性，液体雾化器与气体辅助雾化装置影响液体初次破碎与雾化，雾束形成器影响雾滴的二次破碎与约束液束形态；超声雾化发生器的气液比与气液压力比存在幂函数关系，幂指数为-1.09；雾滴粒径越小，雾滴的降尘效率越高，当雾滴D50为23 μm时，雾滴的降尘效率在94%以上；在破碎筛分车间振动筛给料皮带和筛上皮带受料点布置超声雾化发生器，超声雾化发生器开启后，车间内粉尘浓度降低至586～10.54 mg/m3，降尘效率在71.38%以上。     

Effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter using CFD

The effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter has been evaluated using computational fluid dynamics (CFD). The shear stress transport k-ω (SST k-ω) turbulence model has been adopted for closure. The performance of two V-cone flowmeters with different beta ratios (β) viz., 0.6 and 0.7 for a fixed vertex angle (ϕ) of 60° has been analysed as a function of Reynolds number (Re). The results show that the coefficient of discharge (C_d) increases with Reynolds number in the laminar and transition flow regimes whereas it is nearly constant in turbulent flow regime. From the results, it can be concluded that C_d is independent of Re for values equal to 4000 and beyond. Further, it is also seen that the performance of the V-cone flowmeter is not affected by the upstream boundary layer thickness if the velocity profiles having different boundary layer thickness are extracted from an axial distance of 10D and more are fed at 5D upstream of the meter. However, the meter is sensitive to the extracted velocity profile from an axial distance of 5D and uniform velocity profile being fed at 5D upstream. The value of C_d may be sensitive as a result of the pressure variation due to the obstruction.     

改性石墨烯包覆光纤的马赫-曾德尔大肠杆菌传感器

针对日益严峻的食品安全问题,特别是食源性致病菌的快速检测,本文提出一种基于表面改性石墨烯粗锥型马赫-曾德尔干涉结构的光纤大肠杆菌传感器。首先,截取一根4 cm的实心光子晶体光纤,两端分别与两根单模光纤进行粗锥熔接,形成基于马赫-曾德尔干涉原理的传感结构;接着,制备一种表面改性石墨烯敏感材料,将它涂覆在实心光子晶体光纤的表面,使传感器对大肠杆菌溶液有较高的灵敏度;最后,将上述传感器置于水槽中,以此检测大肠杆菌溶液浓度。实验结果表明,在大肠杆菌溶液浓度为50~600 cfu/mL内,随着菌液的浓度增大,传感器的干涉光谱发生了明显的蓝移,灵敏度为3.43 pm/(cfu·mL^-1),菌液浓度与波长偏移的线性度为0.95649,检测限为67.18 cfu/mL,响应时间为15 s。该传感器成本低、体积小、响应时间快,适用于低浓度大肠杆菌浓度的快速检测。